1. The walls and roof panels of the purification plant are generally made of 50mm thick sandwich color steel plates, which are characterized by beauty, strong rigidity, good insulation performance, and easy construction. Curved corners, doors, window frames, etc. are generally made of specialized alumina profiles
2. The ground can be made of epoxy self leveling flooring or advanced wear-resistant plastic flooring. For those with anti-static requirements, anti-static types can be selected.
3. The return air duct is made of hot-dip galvanized sheet and coated with flame-retardant PF foam plastic sheet with good purification and insulation effect.
4. The high-efficiency air supply outlet is equipped with a stainless steel frame, which is aesthetically pleasing and clean. The punched mesh plate is made of painted aluminum plate.
5. The cleanliness level of the purification workshop is divided into hundreds, thousands, tens of thousands, hundreds of thousands, and hundreds of thousands. In other words, the lower the value, the higher the purification level. The standard for a 100000 level purification workshop is the number of air changes in the clean room. The air exchange rate of a 100000 level clean room shall not be less than 15 times/h. The air exchange rate of a 10000 level clean room shall not be less than 25 times/h. The air exchange rate of a 1000 level clean room shall not be less than 50 times/h. Purification mainly relies on the continuous dilution of indoor air by clean airflow to gradually discharge indoor pollution and achieve a clean effect.
